Hi everyone, Release date version 1: 06 May 2026
Please download the newly released Qlife Respire 1000 maintenance Guide. One of the reasons this guide was created is that very poor-quality distilled water is sold in the market or is homemade. Please download and learn more about it, as this simple maintenance will prolong the Qlife Respire 1000 lifespan.
Maintenance Guide_ H2 Respire 1000 Clinical Grade H2 Inhalation Machine_PDF
Essential Maintenance Steps
| Maintenance Task | Frequency | Description |
|---|---|---|
| Use 100% Distilled Water | Always | Use only pure water with a TDS level below 5 ppm. Never use mineral water, as it can damage the internal electrodes. |
| Resin Filter Replacement | Regularly | Replace filters to ensure the water remains purified for optimal hydrogen generation. |
| Water Change Alarm | As Needed | When the alarm sounds, drain the tank and refill it with fresh distilled water. |
| Monthly “Warm Flush” | Monthly | Perform every 2 water change cycles to release scale buildup from the electrode membrane. |
How to Perform the “Warm Flush”
- Heat: Warm distilled water to approximately 60°C (140°F).
- Soak: Pour it into the tank and let it sit (NO Powered/unplug ) for 20 minutes.
- Run: Turn the machine on and let it run for 1 to 1.5 hours.
- Drain & Refill: Drain all water via the rear valve and refill with room-temperature distilled water.
For further assistance, you can contact the support team at Info@qlifecanada.ca or visit the Qlife Canada product page.
Would you like me to create a step-by-step checklist you can print out for monthly maintenance?